Home
Page |
 BXL2500
Filter SystemThe BXL2500 is designed for tanks where overhead clearance is a problem. The motor is inverted and positioned outside the tank, taking up only 2" (5 cm) of space above the tank. The unit provides a maximum flow rate of 2500 gallons (9500 liters) per hour. Use it stationary on one tank or move it from tank to tank. Multiple body lengths (8, 10, 12 and 14") enable use of the BXL2500 in tanks with varying solution levels and depths. The BXL2500 comes complete, preassembled, ready to operate and includes the items shown in the labeled photo (right). For best results in most metal finishing solutions, use the BXL2500 with our Permacore Magnum (PMCA) reusable or FK50 Poly-Spun Disposable filter cartridges in the appropriate length. BXL2500 Specifications Pump: Available in CPVC, polypropylene, PVDF (Kynar), and stainless steel (see Bulletin 23.5) as pump materials of construction. Standard shaft is made of Teflon-covered 303 stainless steel. A titanium-tip or Hastelloy-276C-alloy-tip shaft is available on special-order basis. Flow Rate: 2500 gallons (9500 liters) per hour at 60 Hz. A flow-rate reduction of about 18% is typical when operating at 50 Hz. Pressure: 27 feet (8.2 meters) of head pressure. Weight: About 25 pounds (11 kg) in CPVC, depending on pump body length Motor: Epoxy coated, TEFC, Thermally Protected. Available in single phase, 1/3 HP (250 watt), 120/240 V, 6.0/3.0 A, 50/60 HZ, 2850/3450 RPM. Call for information on 3-phase motors. Important: To ensure priming and proper operation, solution should be 3" (8 cm) or more above Weep Hole on pump body. Specify length of pump body when ordering. (Note: Impeller is located just beneath Weep Hole and must be submerged in solution for pump to operate.) Also, with standard BXL2500, width of tank lip or flange must be less than 3-1/2" (9 cm) due to fixed space between pump body and motor. Optional Long Motor Base accommodates tank mounting surfaces up to 6-1/2" (16 cm) wide. BXL2500 Dimensions To determine the pump-body length, measure the "A" Dimension (from bottom of Pump Base to bottom of Swiveling Impeller Housing), as shown below:
|
Flo King Filter Systems, 401 Lake Bennett Ct.,
Longwood, FL 32750-6341 USA
Phone: 407-331-4634 Fax: 407-331-0575 E-Mail:
floking@sprintmail.com
"A" Dimension