Home
Page |
 BX3000
Filter SystemThe BX3000 provides a maximum flow rate of 3000 gallons (11,500 liters) per hour. Use it stationary on one tank or move it from tank to tank. Multiple body lengths (8, 10, 12, 14, 16, 18 and 20") enable use of the BX3000 in tanks with varying solution levels and depths. The BX3000 comes complete, preassembled, ready to operate and includes the items shown in the labeled photo (right). For best results in most metal finishing solutions, use the BX3000 with our Permacore Magnum (PMCA) reusable or FK50 Poly-Spun Disposable filter cartridges in the appropriate length. BX3000 Specifications Pump: Available in CPVC, polypropylene, PVDF (Kynar), and stainless steel (see Bulletin 23.5) as pump materials of construction. Standard shaft is made of Teflon-covered 303 stainless steel. A titanium-tip or Hastelloy-276C-alloy-tip shaft is available on special-order basis. Flow Rate: 3000 gallons (11,500 liters) per hour at 60 Hz. A flow-rate reduction of about 18% is typical when operating at 50 Hz. Pressure: 27 feet (8.2 meters) of head pressure. Weight: About 24 pounds (10.5 kg) in CPVC, depending on pump body length Motor: Epoxy coated, TEFC, Thermally Protected. Available in single phase, 1/3 HP (250 watt), 120/240 V, 6.0/3.0 A, 50/60 HZ, 2850/3450 RPM. Contact us for information on 3-phase motors. Important: To ensure priming and proper operation, solution should be 3" (8 cm) or more above Weep Hole on pump body. Specify length of pump body when ordering. (Note: Impeller is located just beneath Weep Hole and must be submerged in solution for pump to operate.) BX3000 Dimensions To determine the pump-body length, measure the "A" Dimension (from bottom of Motor Base, where pump is mounted on tank, to center of pump discharge port, where solution is expelled from pump).
|
Flo King Filter Systems, 401 Lake Bennett Ct.,
Longwood, FL 32750-6341 USA
Phone: 407-331-4634 Fax: 407-331-0575 E-Mail:
floking@sprintmail.com
"A" Dimension